Pullmax holder

Here's a cool tool holder we made for a customers pullmax machine.  The one on the right is the original and on the left is the one I made without the offset.

Machining jobs

Pearson Customs is looking for a couple new production machining jobs for our cnc mill, if your shop can't keep up or you just want your product made in the USA give us a call or email for a quote.

Form tool

Here's a picture of the tool I made to do the ball's on the risers ..

Risers

Had to make a form tool to make the balls on these.  It worked out really well without any chatter.

Head fixture

I've been building a new fixture for machining heads the last few days.. its almost done I just need to figure out the bolt patterns on the head to drill in the top plate. 

Narrowed Springer

Just finished up narrowing this springer by a 1.500 and keeping the same overall length,  it took 20 hours to do but well worth the extra work .. its so cool looking!

Scooter Trash Shirts

I have some Scooter Trash shirts left over from the bike show if anyone is interested they are $15 shipped!

I'm back

Well it's been a crazy last couple months for me from getting married to a funeral and I apologize for not updating the blog. Here's a picture of the flasks I had my friends at Cycle Boys make for me.. they turned out so cool!  Thanks Brent

Springers

Three springers ready to ship out!

Published with Blogger-droid v1.6.8

PaPa Clutch’s Open House

Sturgis

Make sure to stop by the chip and check out the lot this year!

Published with Blogger-droid v1.6.8

Steering necks

Before and after shot of the machining ..

Published with Blogger-droid v1.6.8

Something different

Just finished this one on Saturday for a customer. Not exactly my style but it's what he wanted so it's what he got ...

Published with Blogger-droid v1.6.8

Stop plates

Finally after so many years we are making our own heavy duty stainless dust covers and stop plates, these are not hard jobs but for some reason I had never found the time to machine them.. until now

Published with Blogger-droid v1.6.8

Black floorboards

Trying out some different finishes on our floorboards .. what do you think?

Published with Blogger-droid v1.6.8

Bolts

Here's a couple sets of bolts we made for a friend ..

Published with Blogger-droid v1.6.8

BMR

We made it home safe, just missed the tornado in Missouri only caught the tail end for about a half hour but it was a close call.. What a great time seeing everyone and meeting new people this year, what a blast. This is the best event of the year and I cant wait for next year!!

57

And the fun begins!!

Published with Blogger-droid v1.6.8

BMR

I cant wait for the BMR this  year.. Check out this link for sort video of it ..http://youtu.be/BJRoGeBDhks

Brass rocker shaft nuts

Here's a set of our brass rocker shaft nuts on a ironhead we are doing for a customer..

and the back side

Torque Fest

Well it was a last minute decision to hit up Torque fest but man was it a good one!! It was a huge event for only being in its second year, tons of kick ass hot rods and bikes all over the place!! It was great to see all my friends from the limpnickie lot and had the pleasure to meet some new ones. If you didn't make it this year make sure to have it on the calendar for next year!!

New Aluminum Floor Boards

Pearson Customs NEW BMX Aluminum Floor Boards are machined out of aluminum and are one piece including the mounts. The mounting requires new hardware which is included in the kit. The boards are available in Machined or Polished and are available on our web site now!

93" Custom Shovelhead

Freese is selling his shovel!!   $8001.00
93inch dual plugged shovelhead , Custom frame, Pearson Customs springer frontend, 200 rear tire , 4 speed trans, 3 inch primo belt drive, Crane hi4 ign., Custom pipes,  S&S carb, HHI rear brake,60 spoke rims,built in passanger & highway pegs, This bike is 90% complete.  It needs foot controls, a seat, new rear hub, to be wired and a gas tank.  This bike is bare metal and is unfinished.Firm on price! contact 612-282-0277

Caliper Brackets

Made up some 11 1/2" rotor caliper brackets today

Published with Blogger-droid v1.6.7

So Cool..

Matt's Sears front ends all done, just have to do some clean up work. I lost alot of arm hair brazing these together! These kind of jobs are so much fun for me, its a challenge to build something that has to look identical to the original .. Thanks again Matt for your work.

Published with Blogger-droid v1.6.7

Sears front end

One almost done and two more to go! These are for my friend Matt and are so much fun to build. There were some smart machinists back in 1914 that's for sure ..

Published with Blogger-droid v1.6.7

Rockers

Heres a rocker set-up we did for Don Woods bike he is building.

1914 Sears Front end

Worked on the Sears front ends today and got the spuds made tomorrow I can start fitting them..

Donnie Smith Show

What a great time this show is from Teaches pre show party to all the new and old faces at the show.. I didn't take many pictures but here are a couple

Good wekend on the lathe and mill

Had a great weekend on the machines making parts..

5 sets  of Axle Blocks ready to be tapped..

Spun up some Gas Caps and Tranny Caps on the lathe..

Also some Oil Tank ends on the mill.. Check out the half finned ones, I had to stop the machine early because these looked so cool! Stay tuned for Mr. Don Woods rockers to come to life..

Forward Controls

Here are some pictures of a set of forward controls we revived and rebuilt in to a new set to fit a XS650 with standard mounting holes, Here is what we started with..

I had to make a new backing plate for the shift side since the old one was broke..

Always better to have three rather than one! The Brake side went really good since there was only pegs and some filing to do ..

 Brake side done and ready to go

Shifter Side done and ready to go.. Notice this is set up for foot clutch and all machined to fit a xs650 clutch cable. 

Daytona Swapmeet

Spuds

I've been on the mill and lathe the last couple days making spuds for our springers, these are alot of work but are well worth the strength and look..

Published with Blogger-droid v1.6.7

Jared's Springer

Finished up a original springer this morning for a customer of ours..

Published with Blogger-droid v1.6.7

Sears castings

The castings all welded and finished ground. Next up is pressing in the neck stem and welding them in..

Published with Blogger-droid v1.6.7

1914 Sears Front end

In the last couple years I have had the honor to work with Matt and Carl from Carl's Cycle Supply and the projects are always a lot of fun but this one is going to kick ass!! Your going to want to watch these girls come to life..

The main castings after machining in a fixture to straighten out the legs that got bent during the casting process. Next is to make filler pieces to take up the gaps and then weld and file down smooth..

After Welding.. tomorrow I'll finish up the welding and get these ground down so I can press the neck stems in.